Our Products

VIVOLO - XU210 – ‘BH’ TYPE MOTOR – Ø50 FLANGE – TAPER SHAFT

  • Displacements from 4.2 cm3/revolution to 39.6 cm3/revolution.
  • Maximum pressures up to 300 bar.
  • Rotation speeds up to 3500 rpm.
  • Configurations with inlet and outlet in the body, flange and cover.

Available shafts:

  • Tapered Woodruff key;
  • Parallel with key;
  • Milled shank;
  • Splined.

Click here for Flow rates and 3D Step Models.  

VIVOLO - XU210 – ‘BH’ TYPE MOTOR – Ø50 FLANGE – TAPER SHAFT
Tip Deplasman Tork(Nm) Güç(kW) Çalışma Bsc. Maks. Pik Basıncı Min. Devir Maks. Devir Flanş Mil
cm3/rev 1000dev/dk-100bar 1000dev/dk-100bar bar bar dev/dak. dev/dak mm mm
XV-2U/04 4,2 5,68 0,6 260 300 700 3500 Ø50 f7 1:8 Konik Ø17,42
XV-2U/06 6 8,12 0,85 260 300 700 3500 Ø50 f7 1:8 Konik Ø17,42
XV-2U/09 8,4 11,36 1,19 260 300 700 3500 Ø50 f7 1:8 Konik Ø17,42
XV-2U/11 10,8 14,61 1,53 260 300 700 3500 Ø50 f7 1:8 Konik Ø17,42
XV-2U/14 14,4 19,48 2,04 250 290 700 3500 Ø50 f7 1:8 Konik Ø17,42
XV-2U/17 16,8 22,73 2,38 230 270 700 3500 Ø50 f7 1:8 Konik Ø17,42
XV-2U/19 19,2 25,97 2,72 210 250 700 3000 Ø50 f7 1:8 Konik Ø17,42
XV-2U/22 22,8 30,84 3,23 200 240 700 3000 Ø50 f7 1:8 Konik Ø17,42
XV-2U/26 26,2 35,44 3,71 170 210 700 3000 Ø50 f7 1:8 Konik Ø17,42
XV-2U/30 30 40,58 4,25 160 200 700 2500 Ø50 f7 1:8 Konik Ø17,42
XV-2U/34 34,2 46,27 4,85 150 190 700 2500 Ø50 f7 1:8 Konik Ø17,42
XV-2U/40 39,6 53,57 5,61 140 180 700 2000 Ø50 f7 1:8 Konik Ø17,42