Our Products

VIVOLO - XU140 – ‘HY’ TYPE MOTOR – ø32 FLANGE – MILLED SHANK

  • Displacements from 0.91 cm3 / revolution to 9.88 cm3/ revolution.
  • Maximum pressures up to 300 bar.
  • Rotation speeds up to 6000 rpm.
  • Configurations with inlet and outlet in the body, flange and cover.

Available shafts:

  • Tapered 1:8 Woodruff key;
  • Parallel with key;
  • Milled shank;
  • Splined.

 Click here for Flow rates and 3D Step Models

VIVOLO - XU140 – ‘HY’ TYPE MOTOR – ø32 FLANGE – MILLED SHANK
Tip Deplasman Tork(Nm) Güç(kW) Çalışma Bsc. Maks. Pik Basıncı Min. Devir Maks. Devir Flanş Mil
cm3/rev 1000dev/dk-100bar 1000dev/dk-100bar bar bar dev/dak. dev/dak mm mm
XV-1U/0,9 0,91 1,23 0,13 240 280 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/1,2 1,17 1,58 0,17 250 290 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/1,7 1,56 2,11 0,22 250 290 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/2,2 2,08 2,81 0,29 250 290 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/2,6 2,6 3,52 0,37 250 300 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/3,2 3,12 4,22 0,44 250 300 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/3,8 3,64 4,92 0,52 250 300 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/4,3 4,16 5,63 0,59 250 300 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/4,9 4,94 6,68 0,70 250 300 6000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/5,9 5,85 7,91 0,83 250 300 5000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/6,5 6,5 8,79 0,92 250 300 5000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/7,8 7,54 10,20 1,07 220 260 5000 Ø32 f7 Kurt ağızı Ø10 x 5
XV-1U/7,9 9,88 13,37 1,40 190 230 4000 Ø32 f7 Kurt ağızı Ø10 x 5